Walk-on Glass, Torquay
INTRODUCTION
The client had a room below with less than adequate natural light.
ABOUT THIS PROJECT
A square hole was formed, levels were set, and the flooring was already in.
After a site survey and a brief chat, a mild steel folded frame was an idea we introduced. This would support the glass and look good from below with a powder coated finish.
The painted frame would support the glass with a 50mm bearing around the perimeter creating the largest clear glass area we could create.
WHAT WE DID
A square hole was formed, levels were set, and the flooring was already in.
After a site survey and a brief chat, a mild steel folded frame was an idea we introduced. This would support the glass and look good from below with a powder coated finish.
The painted frame would support the glass with a 50mm bearing around the perimeter creating the largest clear glass area we could create.